Most homeowners pay between roughly $450 and $1,100 for a standard hinged security door supplied and installed, with sliding doors and window screens sitting either side of that band depending on size and specification, according to market cost estimates. The final figure depends heavily on mesh type, lock system and how complex the installation is. Before you commit to anything, arrange an on-site measure and get a written, itemised quote so you know exactly what you’re paying for.
TL;DR:
- Most security door installations cost between $450 and $1,100, with stainless steel mesh options usually at the higher end of the range.
- Sliding doors are approximately 25% more expensive than hinged doors, mainly due to additional hardware like tracks and rollers.
- A reliable quote must specify product details, mesh retention methods, lock types, and confirm compliance with AS 5039.2 standards to avoid inflated costs.
- Repairs are typically more cost-effective for minor damage, but total replacement is necessary if structural issues compromise security or compliance.
- The entire installation process from site measurement to handover usually takes one to two days, with manufacturing taking two to four weeks.
Table of Contents
- What you’ll usually pay: price ranges by door and screen type
- The cost drivers suppliers will quote for and why they matter
- Checklist to compare and validate replacement quotes
- Deciding between a repair and a full replacement
- What to expect: on-site measure, manufacturing lead times and installation day
- Red flags and consumer-protection steps when hiring an installer
- What Eastern Security Doors sees on site, and what to insist on
- How Eastern Security Doors can help with your replacement
- Standards and consumer resources worth checking
- Sources
- FAQ
What you’ll usually pay: price ranges by door and screen type
Security door pricing splits roughly into three tiers, and knowing which tier a quote sits in tells you a lot about what you’re getting. At the entry level, diamond grille doors are the cheapest option because they use less material and a simpler frame. Mainstream stainless steel woven mesh doors cost more but offer better resistance to cutting and impact, and they’re what most Melbourne homes end up choosing. Premium mesh systems, often paired with advanced locking, sit at the top of the range.
According to market estimates, a standard hinged security door supplied and installed typically falls between about $450 and $1,100, while stainless steel mesh doors commonly run from $700 to $1,300. Premium mesh systems cost more again, reflecting the extra material and testing behind them.
Door type and configuration change the total significantly:
- Sliding security doors typically cost around 25% more than an equivalent hinged door, largely due to the track and roller hardware involved.
- Double doors and French door sets cost close to double a single door, since you’re essentially paying for two full units and two sets of hardware.
- Window security screens are usually priced lower than doors because they’re smaller and simpler to fit, though a bushfire or cyclone rating adds cost due to the heavier-gauge materials and additional fixing points required.
Our detailed pricing guide breaks these bands down further if you want a closer look at where your job might land. For window-specific detail, our guide to window security screens covers the differences between fixed, hinged and sliding screen options.
The cost drivers suppliers will quote for and why they matter
A quote is really a list of decisions, and each one moves the price. Understanding what drives the number helps you spot a fair quote from an inflated one.
- Material and mesh type: aluminium frames with stainless steel mesh cost more than basic aluminium grille, and how the mesh is retained in the frame (mechanically fixed versus glued) matters more than the mesh grade itself.
- Locking system and hinge arrangement: a triple-point lock with non-removable hinge pins costs more upfront but closes off common forced-entry points that a single latch leaves open.
- Fixings and substrate: fixing into timber, steel or masonry each require different hardware, and paying for the correct fixings is cheap insurance against a door that fails under pressure.
- Custom sizing, finish and ratings: powder-coat finishes, bushfire or cyclone ratings, and add-ons like integrated pet doors all add to the base price.
- Lead time and order size: single-door orders often sit at the top of the price range because fixed costs like the site measure and installer setup are spread across just one unit.
Pro Tip: Ask any supplier how their mesh is mechanically retained in the frame. It’s the single most revealing question to separate a genuine security door from a cosmetic screen.
For a closer look at lock upgrades and what they cost on their own, see our guide to security door lock replacement.
Checklist to compare and validate replacement quotes
Two quotes with similar totals can represent very different products, so compare them line by line rather than by the bottom figure alone.
- Confirm the exact product spec, mesh grade and retention method, and ask for evidence of any AS 5039.1 certification claims.
- Check the lock type, hinge type and fixing method, and confirm installation follows AS 5039.2 installation guidance for the door or screen type.
- Make sure removal and disposal of your old door or screen is included, along with any wall patching, and get warranty coverage and lead times in writing.
- Verify the deposit amount is reasonable, ask for a written contract, and check the supplier’s ABN and who actually carries out the installation, whether that’s an employee or a subcontractor.
Our piece on demanding AS 5039.1 proof for custom doors goes into more detail on what documentation to ask for before you sign anything.
Deciding between a repair and a full replacement
Not every damaged door needs replacing. A bent hinge, a failed latch or a torn mesh panel can often be repaired for a fraction of the cost of a new door, while structural damage changes the equation entirely.
- Repairs to hinges, locks or minor mesh damage are usually the cheaper option and can often be done in a single visit.
- Replacement becomes the safer choice once you’re dealing with corrosion, a warped frame or fixings that have pulled away from the wall, because these compromise the door’s ability to resist forced entry.
- Where a security door forms part of an insurance requirement or rental compliance obligation, replacement with a certified product is often the safer path, since a repaired but non-compliant door may not satisfy those conditions.
Our comparison of repair versus replace costs sets out typical repair price ranges alongside replacement thresholds in more detail.
What to expect: on-site measure, manufacturing lead times and installation day
Replacement follows a predictable sequence, and knowing the timeline helps you plan around it.
- An installer visits to measure the opening precisely, since even small discrepancies affect fit and pricing, and this step is where most quote accuracy is determined.
- Manufacturing typically takes two to four weeks, though custom sizes, special finishes or higher-rated products can extend that.
- On installation day, fitters remove the old door, check the opening for plumb, fix the new unit with fixings matched to the substrate, and test the lock repeatedly before handover, a process that generally takes 60 to 90 minutes for a standard hinged door.
- At handover you should receive your keys, warranty paperwork and brief guidance on maintaining the door.
For a step-by-step look at what a compliant installation involves, see our guide to achieving a compliant security door.
Red flags and consumer-protection steps when hiring an installer
Most security door jobs go smoothly, but the industry has had its share of complaints worth knowing about before you pay anything.
- Be wary of large unexplained bills that exceed a verbal estimate, businesses that change names frequently, or any installer unwilling to provide a written quote before starting work.
- Keep deposits small relative to the total job, insist on a written contract that lists the product spec and fixings, and note that card payments may offer chargeback options if something goes wrong.
- Check the supplier’s ABN, ask how long they’ve operated locally, and request references from recent jobs before committing.
Public warnings from Consumer Affairs Victoria document cases where customers were charged far more than their original verbal estimate or received incomplete installation work, underlining why a written quote matters before any money changes hands.
What Eastern Security Doors sees on site, and what to insist on
Free on-site consultation, custom manufacture and professional installation backed by a warranty are offered, drawing on extensive local experience and residential security automation services. The most common failings we see on other suppliers’ work are poor fixings, mesh that’s glued rather than mechanically retained, and vague quotes that don’t specify the lock or fixing method. Ask for these details in writing before you pay a deposit.
— MYBMC
How Eastern Security Doors can help with your replacement
If you’re weighing up a hinged door, a sliding set or a run of window screens, getting a firm, itemised number beats guessing from price ranges alone. A free on-site measure, custom manufacture and professional installation across a range is offered, plus service and repair for doors already installed.
What you can expect includes:
- A written, itemised quote covering product spec, mesh retention method, lock system and installation.
- A reasonable deposit and a proper contract before any work begins.
- Awareness of AS 5039 requirements where they apply.
- Warranty and local experience behind every install.
Browse our aluminium doors or stainless steel security doors range, or get in touch to book a free on-site measure and quote.
Standards and consumer resources worth checking
- AS 5039.1 sets performance requirements for security screen doors, useful for checking a supplier’s certification claims.
- AS 5039.2 covers installation requirements, worth referencing when confirming a quote includes compliant fitting.
- The Consumer Affairs Victoria public warning page is a practical example of the complaints pattern to watch for.
Sources
- AS 5039.1:2023 (product listing) — Standards Australia
- AS 5039.2:2024 (installation) — Standards Australia
- Security door cost estimator — GoingRate
- What happens during a security door installation — HomeOne / OnGuard Security Products
- Pick & Lock (Wise Tech Services Pty Ltd) — public warning — Consumer Affairs Victoria
FAQ
How much does a standard hinged security door cost installed?
A standard hinged security door supplied and installed typically costs between about $450 and $1,100, with stainless steel mesh options running higher. The exact figure depends on mesh type, lock system and how complex the installation is.
Why do sliding security doors cost more than hinged doors?
Sliding doors typically cost around 25% more than an equivalent hinged door because of the additional track and roller hardware involved. Double doors and French sets cost close to double a single unit for similar reasons.
What should a proper security door quote include?
A proper quote should specify the exact product, mesh grade and retention method, the lock and fixing type, and confirm installation follows AS 5039.2 guidance. It should also state whether removal and disposal of the old door are included, along with warranty terms and lead time.
Is it cheaper to repair or replace a damaged security door?
Repairing hinges, locks or minor mesh damage is usually cheaper than full replacement and can often be done in a single visit. Replacement becomes the better option once there’s corrosion, a warped frame or fixings pulled away from the wall, since these affect the door’s ability to resist forced entry.
How long does a security door installation take?
A professional installation for a standard hinged door typically takes 60 to 90 minutes once the fitter is on site. Manufacturing beforehand generally takes two to four weeks, though custom sizes or special finishes can extend that.